SEAL CLASPER

SEAL CLASPER is designed for the installation of PTFE piston seal. It can clasp the seals back to the groove, with seal ranging from 1.97"(50mm) OD to 14.17"(360mm) OD. The stainless steel belt is adjustable according to the dimension of seals, and the HPU triangle protector prevents the seal from damage in the pressing process.

Instructions for use:

• 1. Pull out the belt to a suitable length at the right side;
• 2. Pull up the knob, and then rotate it in a clockwise direction until the belt can clasp the seal;
• 3. Stretch the handles and keep clasping for at least 5 seconds.

*Notice:

• please use in combination with Seal Stretcher.